|
Most Mirror Glass Is Bonded To A Plastic Inter-Platform Or Backing Plate That Is
Mounted Inside The Mirror Head.
1. Remove loose glass from the backing plate.
2. Clean the backing plate and back of Redi Cuts mirror with rubbing alcohol or
adhesive-safe glass cleaner.
3. Locate contact points between the mirror and mirror backing-plate by dry-fitting
the Redi-Cuts mirror replacement.
4. Apply Burco Redi Stick patches (included with mirror glass purchase) to mirror
backing-plate. Press patches firmly into place keeping white release liner in tact.
Using this method will optimize adhesion. Peel off release liner.
it may be necessary to back-fill with urethane or silicone adhesive since the mirror
matches the bend of the original mirror glass.
5. Press Redi Cuts mirror firmly into backing plate.
|